Se habla Español

Neumann KH 750 10-in Active DSP Subwoofer

10″ Subwoofer with Analog/Digital I/O, Audio over IP, DSP Control, and Immersive Audio Support

$1,650.00

12-Month Special Financing**

SKU: NEU508296 Categories: , , Brand:

Description

Small Room? No Problem.

We all know that a subwoofer is an essential tool for production, mixing, and mastering. Without a subwoofer, there’s a good chance you’re not hearing what’s happening in the lowest octaves of your music. This can lead to out of tune kick drums and excessive low-end build up, which eats up your headroom and pushes your monitors harder than you need to. Of course, this is a two-way street. If you’re working in a smaller mix room, home studio, or post-production suite, the low-end can build up and cause more harm than good. This is where the Neumann KH 750 comes in.

Neumann KH 750 – Ultimate Low-End Control

Four Routing Modes, 8-Position Phase Control, Continuous Low-Cut, and Parametric Equalizer – the Neumann KH 750 has it all! Tune your low-end to your room with extensive controls to eliminate room modes and excessive low-frequency build up. The inclusion of Neumann.Control allows you to modify and control a wide range of features directly from your iPad. These include control over volume, preset levels, dim, mute all, logo brightness and more. Where Neumann.Control really shines is when integrating the KH 750 in your studio.

Integration with Any System

In addition to standard operating controls, the Neumann.Control app is incredibly useful when adding the KH 750 to your monitoring setup. If this is your first time installing a subwoofer, use the Guided Alignment tool to get the most from your sub. If, on the other hand, you prefer more hands-on control, switch over to Manual Alignment. This gives you total freedom over an 8-band fully parametric EQ, levels, and delays for each monitor or sub in your system. This is especially handy when working with multi-speaker setups, with support for up to 9 speakers or subwoofers. The inclusion of Digitial I/O and Network Connection via IP gives you ultimate flexibility for working in networked studios and production houses.

Legendary Neumann Quality

Of course, the Neumann KH 750 maintains the brand’s legendary build quality and sonic integrity. If you’ve ever used the Neumann U67 or KH 310 Monitors, you’ll know exactly what this means. Sturdy construction for years of use paired with reliably natural sound to get your mixes right where you need them. By taking the strain off of your main monitors, you’ll actually get more power, less distortion, and a longer lifespan from your monitoring system.

Specifications:

THD+N: analog, digital < -100 dB; < -90 dB
Free field frequency response ±6 dB 16 … 800 Hz
Free field frequency response ±3 dB 18 … 750 Hz
Reproduction accuracy between 50 Hz and 100 Hz: 100%, 80%, 50% of subwoofers produced n/a
Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu) <20 dB(A) SPL
Sine wave output with a THD < 0.5 % at 1 m in half space 95 dB SPL (>70 Hz)
Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz) 105.0 dB SPL
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range) n/a
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair with subwoofer) n/a
Analog input(s) 2 x XLR: analog electronically balanced
Analog input impedance >13k Ohms
Max. input level < +24 dBu
Common mode rejection ratio (CMRR) > 56 dB @ 15 kHz
Crosstalk (1 kHz), level matching < -90 dB; ±0.1 dB
Volume control via Neumann.Control software
Volume control range; resolution 0 … -∞ dB; 0.1 dB
Analog dynamic range; THD+N 119 dB(A); <0.003% (-90 dB)
Signal routing modes Right; External Bass Management; 2 x LFE
Analog output(s) 2 x XLR; analog electronically balanced
Input gain control (sensitivity) +2 … -12 dB
Output level control (output level in 1 m based on 0 dBu input level) 94; 100; 108; 114 dB SPL
Digital input(s) BNC (75 Ω): AES3; S/P-DIF
Digital output(s) BNC (75 Ω): AES3
Digital converter: resolution; design 16 … 24-bit DAC; Δ∑
Digital converter: sampling rate 48 kHz
Dynamic range A-D-A >120 dB(A)
Dynamic range D-A >123 dB(A)
Digital sensitivity -18 dBFS = 100 dB SPL at 1 m
Latency 1.5 ms (A-D-A linear phase); 1.2 ms (D-A linear phase)
Delay: User adjustable delay range 0 … 100 ms and 2 x 0 … 20.8 ms
Delay: Resolution: time; distance 0.1 ms; 3.44 cm (1 3/8”)
Delay: Max. frames Audio-video synchronisation (lip sync) 2.5 (40 ms) frames; 3 (33 ms) frames
Delay: Time-of-flight maximum distance 2 x 7.16 m (23′ 5″)
Controller design Digital; active
Crossover frequency 80 Hz fixed or 60 … 100 Hz via Neumann.Control
Crossover slope 24 dB/oct; 4th order
Phase 0; 45; 90; 135 und 0/180 deg
Equalization: via Neumann.Control software 8 x full parametric IIR + low / high shelf global balance
FIR phase correction For connected analog loudspeakers: Linear phase (170 Hz … 16 kHz; +/- 45°)
Protection circuitry Driver (thermo limiter); Electronics (temperature limiter); Amplifier (peak limiter, temperature limiter, temperature protection and overcurrent protection); Power supply (temperature limiter and overcurrent protection)
Infrasonic filter: frequency; slope 6.5 Hz; 12 dB/oct.
Remote control Neumann.Control software via an RJ45 connector carrying standard IP data
Display: On; Normal Operation Green LED
Display: Identification Amber LED
Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute Red LED
Display: Bass Management on Green LED
Output power woofer amplifier (THD+N with limiter deactivated: 10%) 256 W
Mains Power Supply: input voltage; frequency 100-240V; 50/60 Hz
Power consumption (230 V / 100 V): Standby <300 mW
Power consumption (230 V / 100 V): Idle 18 W
Power consumption (230 V / 100 V): Full output 410 W
In-rush current (Peak) 30 A @230 VAC
Standby Disabled; 90 mins (default); user defined in software
Cabinet material Wood cabinet, aluminum electronics panel
Cabinet surface finish; color (front / back) Painted; metallic anthracite (RAL 7021) / black (RAL 9005)
Operating conditions +10° C to +40° C (+50° F to +104° F); <90% RH, non-condensing
Transport/storage conditions -25° C to +70° C (-13° F to 158° F); <90% RH; non-condensing
Woofer 10″ with protecting black metal grille
Product dimensions (height x width x depth) 383 x 330 x 383 mm (15 1/8″ x 13″ x 15 1/8″)
External net volume 48.4 liters
Product weight 19.5 kg (43 lbs)

Reviews

There are no reviews yet.

Be the first to review “Neumann KH 750 10-in Active DSP Subwoofer”

Your email address will not be published. Required fields are marked *

Don't see what you're looking for?

We carry all of the top brands for audio and post-production, so don’t hesitate to contact us if you need something specific!

Westlake Pro Card

No Interest if paid in full within 12 Months**

On qualifying purchases made with your Westlake Pro credit card. Interest will be charged to your account from the purchase date if the promotional purchase is not paid in full within 12 Months. Minimum monthly payments required.

**No interest will be charged on the promo purchase if you pay it off, in full, within the promo period. If you do not, interest will be charged on the promo purchase from the purchase date. The required minimum monthly payments may or may not pay off the promo purchase by the end of the promo period. Regular account terms apply to non-promo purchases and, after the promo period ends, to the remaining promo balance. For new accounts: Purchase APR is 29.99%. Minimum interest charge is $2. Existing cardholders: See your credit card agreement terms. Subject to credit approval.

Insider Access to Pro Audio's hottest deals, new gear, and free software.

We hate spam. We don’t share your information with any third parties.

Sign up now!