Royer dBooster In-line Signal Booster

Switchable 12/20dB signal booster and impedance buffer designed for ribbon and dynamic microphones

$199.00

-

12-Month Special Financing**

SKU: ROYRDB20 Categories: , Brand:

Description

Every Detail from your Ribbon and Dynamic Microphones

The Royer R-DB20 is a phantom-powered ribbon and dynamic microphone signal booster and impedance buffer. It increases the level of passive low-output ribbon and dynamic microphones with a minimum of distortion or coloration. Designed for professional applications, the dBooster provides two levels of clean gain boost; 12dB and 20dB, selectable by a front panel switch. The dBooster maintains headroom and gain regardless of load.

The Class A input circuitry presents a high source impedance to the microphone, which minimizes loading (damping). This reduces coloration and distortion while at the same time improving headroom.

By utilizing the 12/20dB gain switch, optimum balance between gain and headroom can be achieved for a variety of uses.

The low-impedance output of the dBooster is an increased microphone-level signal that can drive a digital interface directly or a standard microphone preamplifier. It also minimizes signal loss on long cable runs.

Royer R-DB20 dBooster in one take:

  • Boost the signal of your low-output ribbon or dynamic microphones
  • Capture every detail in low-level vocal and acoustic recordings
  • Retain signal quality over long cable runs
  • Protect valuable ribbon mics from phantom power
  • Small, rugged form-factor perfect for tight miking studio setups
  • Ultra low noise and distortion performance
  • Wide frequency bandwidth maintains signal integrity for any type of recording
  • Increase preamp headroom
  • True electrical isolation for your signal
  • Able to drive difficult loads like vintage preamps and mic splitters without gain loss or distortion

Specifications

  • Gain: 12 or 20dB switchable
  • THD+N: @20dB Gain = .0015%, -25dBu input signal, 1.3Vp-p output signal | @12dB Gain = .001%, -6dBu input signal, 3.66Vp-p output signal
  • IM Distortion: @ 20dB setting, < .002% @ 800mV output | @ 12dB setting, < .005% @ 2.6volts output
  • Self-Noise:  -48dB re. 1V/pa , 20dB setting < 11dBa, 12dB setting < 15dBa
  • Headroom: -48dB re. 1V/pa and 4mV/pa, 20dB setting: 127dB, 12dB setting: 120dB
  • Frequency Response: 20Hz-20kHz +/- .25dB
  • Input Impedance: 3.6K-Ohm
  • Output Impedance: (at 20dB setting) 300-Ohms
  • Current Draw: ~5ma at zero signal and 7.5ma at full output
  • Input/Output Connections: Balanced XLR: (Pin 1 Ground, Pin 2 Signal, Hot, Pin 3 Signal Cold)
  • Power: 48v phantom

Don't see what you're looking for?

We carry all of the top brands for audio and post-production, so don’t hesitate to contact us if you need something specific!

Westlake Pro Card

No Interest if paid in full within 12 Months**

On qualifying purchases made with your Westlake Pro credit card. Interest will be charged to your account from the purchase date if the promotional purchase is not paid in full within 12 Months. Minimum monthly payments required.

**No interest will be charged on the promo purchase if you pay it off, in full, within the promo period. If you do not, interest will be charged on the promo purchase from the purchase date. The required minimum monthly payments may or may not pay off the promo purchase by the end of the promo period. Regular account terms apply to non-promo purchases and, after the promo period ends, to the remaining promo balance. For new accounts: Purchase APR is 29.99%. Minimum interest charge is $2. Existing cardholders: See your credit card agreement terms. Subject to credit approval.

book a consultation

Contact Westlake Pro’s Design Services Group for a free consultation about your next project.

Apply For A Lease From
All Media Capital

Insider Access to Pro Audio's hottest deals, new gear, and free software.

We hate spam. We don’t share your information with any third parties.

Sign up now!