The FullTrap™ is a combination broadband absorber and bass trap that
is mounted on a wall surface to control excessive bass in a room. This
is achieved by combining three acoustical principles into a single device.
To handle mid-range and upper frequencies, a 3” thick front absorptive
panel made from 6 lbs. per cubic foot high-density encapsulated ﬁ berglass
is employed. Behind the acoustic panel is a diaphragmatic dense-mass
membrane that acts as a low frequency resonator to absorb bass below
75Hz. Behind the membrane is an air cavity that is created by the wood
composite enclosure which serves to further attenuate bass in the
troublesome 100Hz region.
The FullTrap enclosure is made from MDF wood composite with a black,
easy to clean melamine ﬁ nish and ships ﬂ at to reduce freight. Final
assembly is performed on site using a simple household screwdriver.
Building a FullTrap takes about 15 minutes from start to ﬁ nish! The Fulltrap
is available in a choice of three panel colors: black, beige and gray
|Dimensions||50 x 25 x 6 in|