Lavry MICPRE Module

4496 MicPre module

$968.00

-

12-Month Special Financing**

SKU: LAVMICPRE Category: Tag Brand:

Description

This Module is a 2-Channel microphone preamplifier module for the LavryBlue 4496 System. Installation of the MicPre module into the LavryBlue chassis is a simple operation that can be done by the user with common tools.

Every 4496 Chassis can hold up to 2 of these modules – for a maximum of 4 channels of micpre.  Each MicPre module takes up 2 of the 4 total module slots available in the chassis.

Other modules available for the 4496 chassis:

  • LavryBlue M-Sync
  • LavryBlue M-AD 824 (2 channel ADC)
  • LavryBlue M-DA 824 (2 channel DAC)

 

KEY FEATURES

  • 2 channels of professional micpre
  • Impedance matching for Condenser, Dynamic, and Ribbon mic’s
  • Super-low noise and distortion over a wide input and gain range
  • Transformerless electronically balanced inputs and outputs provide sonic transparency with excellent channel matching
  • Gain adjustment for each channel in 1dB steps 21-70dB
  • Phantom power setting

 

MICPRE SPECIFICATIONS

  • Distortion- Measured at 100Hz, 1kHz, 10kHz, &20kHz:
    • Gain setting  40- 0.001%
    • Gain setting  60- 0.005%
  • Noise- Input referenced noise at gain settings from 40 to 70dB:
    • Input shorted -128dB
    • 150 Ohm source -126dB
  • Gain-
    • Individual stepped analog control with 21 to 70 dB’s gain in 1dB steps for each channel.
    • Pad- Front panel switch controls both channels for 10dB lower output level.
  • Inputs-
    • Two channels of electronically balanced XLR inputs wired for Pin 2 “+” (non-inverting), Pin 3 “-” (inverting).
    • Input impedance matching for Ribbon, Dynamic, and Condenser microphones. The front panel switch controls both channels.  Absolute Maximum input +3V.
  • Outputs-
    • Two channels electronically balanced XLR outputs +4dBu nominal level. +24dBu Maximum Output Level. Wired for Pin 2 “+” (non-inverting), Pin 3 “-” (inverting) operation.
    • Can be configured for unbalanced operation using internal jumpers.
  • Phantom Power:
    • +48V- Available on the input XLR connectors, only in the “Condenser” settings
    • Dual regulation provides exceptional inter-channel isolation.

Don't see what you're looking for?

We carry all of the top brands for audio and post-production, so don’t hesitate to contact us if you need something specific!

Westlake Pro Card

No Interest if paid in full within 12 Months**

On qualifying purchases made with your Westlake Pro credit card. Interest will be charged to your account from the purchase date if the promotional purchase is not paid in full within 12 Months. Minimum monthly payments required.

**No interest will be charged on the promo purchase if you pay it off, in full, within the promo period. If you do not, interest will be charged on the promo purchase from the purchase date. The required minimum monthly payments may or may not pay off the promo purchase by the end of the promo period. Regular account terms apply to non-promo purchases and, after the promo period ends, to the remaining promo balance. For new accounts: Purchase APR is 29.99%. Minimum interest charge is $2. Existing cardholders: See your credit card agreement terms. Subject to credit approval.

Insider Access to Pro Audio's hottest deals, new gear, and free software.

We hate spam. We don’t share your information with any third parties.

Sign up now!