ATC SCM20A Pro MKII 2-way Active Monitor – Pair

6.5-inch, active 2-way speaker with ATC Super Linear woofer

$6,490.00

-

12-Month Special Financing**

SKU: ATCSCM20APROMK2 Categories: , Tag Brand:

Description

The ATC SCM20A Pro MKII active, high-performance 2-way monitor with 6.5″ ATC Super Linear driver with 3″ soft dome radiator, 1″ soft-dome tweeter, and 250W bi-amp pack

The ATC SCM20A Pro MKII is a compact, extremely high-performance, 2-way active monitor designed to sit in a place of authority on a meter bridge (or better yet, on stands behind a meter bridge). It features several ATC proprietary technologies, including their Super Linear bass driver with an integral 3″ soft dome that acts as a an acoustic radiator. The SCM20A Pro MKII is powered by a 250W, ATC-built, 2-way bi-amp pack that’s perfectly matched to the drivers for extremely linear behavior throughout the audible spectrum and superior transient response. The ATC SCM20A Pro MKII is eminently suited to critical near-field listening in control rooms of all sizes, LCR surround monitoring in small to medium-sized control rooms, or surround channels in medium to large control rooms.

 ATC SCM20A Pro MKII active 2-way monitor in one take:

  • 1″ soft-dome tweeter
  • Full “SL spec” ATC bass driver with integral 3″ soft dome
  • 19.8 lb. precision-machined and optimized motor assembly
  • LF contour control
  • Onboard ATC-built, two-way 250W Bi-Amp Pack
  • Heavily damped Aluminum cabinet
  • 6-year warranty

Who Using ATC?

ATC users range from artists such as Sting, Pink Floyd, The Rolling Stones, Eric Johnson, Enya, Kate Bush, film composer, James Newton Howard, and many more. ATC users include producer-engineers known for their discriminating ears, such as Bruce Swedien, Hugh Padgham, Chuck Ainley, Ed Cherney, producer-engineer-equipment designer, George Massenburg, mastering engineer Bob Ludwig, and John McBride of Blackbird Studios. ATC monitors are also in use at recording studios, soundstages and broadcast facilities, such as East West Studios, Air London, Sony Music Studios, Paramount Studios, Warner Brothers, and BBC UK, to name a few. Even pro audio equipment manufacturers who depend on critical listening for product design depend on ATC, including Shure Microphones and Dolby Laboratories.

ATC SCM20A rear-panel controls and I/O

The rear panel includes an IEC mains connector that can be set for international use; power switch, XLR input that can accept both balanced and unbalanced signals; bass shelf boost/cut from -2dB – +3dB; and an input sensitivity selector switch and trim pot.

ATC proprietary technology:

ATC makes what many consider to be the world’s finest studio monitors, as evidenced by a client list that reads a who’s who of artists, engineers, recording studios, film, post, and broadcast facilities, as well as pro audio manufacturers and educational institutions. Obviously, it takes an attention to fine detail and proprietary technology. Let’s take a closer look at ATC technology.

Linear off-axis response:

To achieve superior loudspeaker performance, there must be a balance between all measured characteristics, including magnitude response, phase response, power response, time domain response, distortion characteristics, and power handling.

Starting with the off-axis response of the loudspeaker, ATC engineers ensure that the phase relationship of the drivers maintain a linear response.

Bass/mid driver soft dome

Soft domes are fixed to the edge of the voice coil, which is 3″ (75mm) in diameter. The dome is designed to decouple from the cone at higher frequencies, where it performs the role of the primary acoustic radiator.

Proprietary soft dome tweeter

In order to maintain the highest levels of performance, ATC controls all aspects of the loudspeaker system to ensure the lowest levels of linear and non-linear distortion. Along with manufacturing their own bass, bass/mid, and midrange drivers, ATC couldn’t rely on OEM or stock designs, and spent considerable time creating a soft dome tweeter to meet their high standards.

Proprietary soft dome tweeter

 In order to maintain the highest levels of performance, ATC controls all aspects of the loudspeaker system to ensure the lowest levels of linear and non-linear distortion. Along with manufacturing their own bass, bass/mid, and midrange drivers, ATC couldn’t rely on OEM or stock designs, and spent considerable time creating a soft dome tweeter to meet their high standards.

Nearly all 1″ (25mm) tweeters use a voice coil suspended in the magnetic gap of the motor immersed in ferro-fluid. The fluid adds mechanical damping, transferring heat to the metalwork and suppressing rocking modes. Over time the fluid starts to thicken presenting resistance to the moving coil assembly, causing the magnitude response to decline.

ATC endeavored to design a tweeter free from the limitation of ferro-fluid while simultaneously overcoming the engineering problems that arise without its use. As with all ATC drivers, the tweeter was approached with optimum performance in mind.

Borrowing the dual suspension technology from their midrange soft dome, which forces the use of a larger voice coil, ATC used extremely large, high-grade neodymium magnets in the motor assemblies to get the required efficiency and top-end extension. ATC also heat-treats the top plate (magnetic annealing) to squeeze that bit extra performance out of the components. Large, well-designed motors mean lots of flux in the gap, which in turn results in extremely low odd-harmonic distortion, an extended magnitude response, and an excellent time-domain characteristic.

Bass/Mid driver construction

ATC drivers feature massive magnet motor assemblies, with no-compromise optimization for each voice coil diameter. Hand-wound voice coils use only high-density, edge-wound, flat OFHC (oxygen-free high thermal conductivity) ribbon copper wire and operate in precision magnetic gaps. Front and rear venting not only reduces airflow noise, but also increases power handling capacity, and therefore, long-term reliability.

Speaker directivity

 The perceived sound quality of a loudspeaker is dependent on its power response, particularly when listening to high-energy transients. As such, high-performance loudspeakers should exhibit a broad and even dispersion with frequency—a factor that ATC takes great care to achieve.

ATC’s largest bass/mid driver is 6.5″ with a crossover of around 2.5kHz, which ATC engineers consider to be a practical limit in a 2-way. In a 2-way system capable of high dynamic range, an ideal crossover point has to be compromised a little to minimize HF driver distortion and increase reliability. If the bass/mid driver was significantly larger, it would become more directional, causing the horizontal response around crossover to suffer. As driver diameter increases to achieve greater bass extension and higher SPL, maintaining good off-axis response would require the move to a three-way system.

Short throat waveguide

ATC tweeters have a carefully designed short-throat waveguide. Deeper throats would affect the balance of the device, both on- and off-frequency, and if taken to the extreme would further increase distortion. At the chosen crossover frequency, ATC’s 25mm tweeter effectively radiates omni-directionally as desired.

In summary

ATC believes that the key to superior performance is designing drivers and systems for use at high levels, and not rigidly adhering to known reference levels for testing. The parameters of drivers vary with level. As such, ATC designs for those changes. Performance at 1W or 90dB SPL is relatively easy, but what happens at 100W or 110dB SPL? ATC knows and designs for it.

Whether you’re mixing for film or commercial music, the detail and spectacular imaging of the ATC ACM50A Pro will make your mix jump out of any speaker as you intended. Talk to your Westlake Pro sales consultant about outfitting your studio with ATC SCM50A Pro 3-way monitors today. 

 

ATC SCM20A Pro MKII specifications:

  • Drivers: HF 1″; Mid/LF 3″/6-1/2″
  • Amplitude linearity (±2dB): 80Hz-17kHz
  • Cutoff frequencies: (-6dB, free-standing): 60Hz, 22kHz
  • Horizontal dispersion: ±80°, Coherent
  • Vertical dispersion: ±10°, Coherent
  • continuous SPL (1 meter): 108dB
  • Crossover frequency: 2.8kHz
  • Input connectors: Male XLR
  • Input sensitivity: 1V
  • Input sensitivity trim: ±6dB
  • Input impedance: Balanced > 10kΩ
  • Amplifier output: Bass 250W, High 50W
  • Filters: Even Order Critically Damped
  • Overload protection: Active FET momentary gain reduction plus thermal tweeter protection
  • Front-panel indicators: Power-on indicator, gain-reduction warning
  • LF EQ: +6dB @ 40Hz
  • Dimensions (H x W x D): 17-19/32″ x 10-19/32″ x 12-3/16″ (448 x 270 x 310mm)
  • Weight: 66 lb. / 30kg

Additional information

Weight 66 lbs
Dimensions 13 × 11 × 18 in
Manufacturer Part Number

Don't see what you're looking for?

We carry all of the top brands for audio and post-production, so don’t hesitate to contact us if you need something specific!

Westlake Pro Card

No Interest if paid in full within 12 Months**

On qualifying purchases made with your Westlake Pro credit card. Interest will be charged to your account from the purchase date if the promotional purchase is not paid in full within 12 Months. Minimum monthly payments required.

**No interest will be charged on the promo purchase if you pay it off, in full, within the promo period. If you do not, interest will be charged on the promo purchase from the purchase date. The required minimum monthly payments may or may not pay off the promo purchase by the end of the promo period. Regular account terms apply to non-promo purchases and, after the promo period ends, to the remaining promo balance. For new accounts: Purchase APR is 29.99%. Minimum interest charge is $2. Existing cardholders: See your credit card agreement terms. Subject to credit approval.

Insider Access to Pro Audio's hottest deals, new gear, and free software.

We hate spam. We don’t share your information with any third parties.

Sign up now!